Furuno GD-280, Operator'S Manual

Page: 197 / 280

11-33
Initial Setting menu Page 2
2. Press
[↑]
or
[↓]
to select item desired;
[←]
or
[→]
to select option.
3. Press the [MENU] key several times to close the menu.
Initial setting menu Page 1
Main Radar: Selects radar to use.
Initial setting menu Page 2
VRM1, VRM2: Select the unit of range measurement (nm, km, sm) for the No.1 and No.2 VRMs.
EBL1, EBL2: Select the bearing reference (true or relative) for the No.1 and No.2 EBLs.
Stern Mark: Turns the stern marker on/off.
Own Ship Mark: Turns the own ship marker on/off. The symbol is scaled to indicate the length
and beam of the vessel. If the largest dimension of the symbol gets smaller than 6 nm, the
symbol will disappear and own ship will be represented with a small dot or circle depending on
the range in use. Ship's dimensions should be entered at installation.
Center Enhance: Enlarges all targets within the first range ring.
Test: Executes the radar self test. See Chapter 14 for details.
[INITIAL SETTING]

Page 1 2
VRM 1 nm km sm
VRM 2 nm km sm
EBL 1 Relative True
EBL 2 Relative True
Index Lines Off 2 6
Stern Mark
Off
On
Own Ship Mark Off On
Center Enhance Off On
Test
→
(RUN)

↑↓←→
: Select & Set.
MENU : Back to Main Menu HL-OFF: Menu off temporarily