Furuno GD-280, Operator'S Manual

Page: 243 / 280

13-27
2. Press the [0] key.
3. Follow the sequence below to enter arrival alarm range of 0.5 nm.
a) Press the [F1] key.
b) Press the [5] key to select Alarm menu.
c) Press the [1] key to select Alarm Setting.
d) Press
[←]
to select page 1.
e) Press
[↓], [←]
to select Arrival.
f) Press
[↓]
to select Alarm Range.
g) Press [0], [0], [5], [0], [0], [ENT] to enter alarm range of 0.5 nm.
h) Press or twice to close the menu. The display shows 51LDLD00500EMM. L =
[←]
,
D =
[↓],
E = [ENT], M = / .
4. Press the [F1] key again. A message asks if you want to register the program.
5. Press the [ENT] key to register the program. To register another program, start from step 2 in
this procedure.
6. To quit, Press the [MENU] key several times to close the menu.
Function Keys

F1 52
F2 02DDDDDDLLLMMM
F3 02DDDDDDLLLRMMM
F4 32DDDDNMMM
F5 41 DDNMMM
F6 31
F7 11MM
F8 12MM
?
[Entry Key]/Character
[
↑
]/U [Number]/0~9 [EXPAND]/M (Use MENU key)
[
↓
]/D [CHG]/S [REDUCE]/M (Use MENU key)
[
←
]/L [ENT]/E [CNTR]/* (For number ent)
[
→
]/R [SEL]/N (For select)

F1 ~ F8: Sel
MENU : Esc
Note: F9 cannot be
registered when
radar is interfaced.