Furuno GD-280, Operator'S Manual

Page: 121 / 280

5-17
5.6.3 Skipping route waypoints
In some instances you may want to "skip" waypoints while following a route. In the figure below,
for example, the vessel has decided to navigate from waypoint 05 to waypoint 03, skipping
waypoint 04.
Port
Port
Waypoint 01
Waypoint 02
Waypoint 03
Waypoint 04
Waypoint 05
Waypoint 06
New Courseline
1. Press [MENU], [4], [1] to display the Setting menu.
2. Press
[↑]
or
[↓]
to select Skip Waypoint.
3. Press
[→]
to select Yes.
4. Press the [ENT] key. At the moment the key is pressed own ship position becomes waypoint
00 and the course is redrawn excluding the waypoint skipped.
5. Press the [MENU] key several times to close the menu.
5.6.4 Following a +cursor-created route
This paragraph shows you how to create and follow a route created with the +cursor. This type of
route is for temporary use - it is deleted when the power is turned off.
1. Press [MENU], [4], [1] to display the Setting menu.
2. Press
[↑]
or
[↓]
to select [Route] Select WP.
3. Press
[→]
to cursor.
4. Use the trackball to place the +cursor on the first route waypoint.
Move +cursor to desired
point.
Change : Flag MK Disp
Erase : Flag MK Erase
ENT : Finish
MENU : Pause