Furuno GD-280, Operator'S Manual

Page: 174 / 280

11-10
To activate the echo stretch:
1. Press [MENU], [9], [3], [3] to show the Echo Signal menu.
2. Press
[↑]
or
[↓]
to select Echo Stretch.
3. Press
[←]
or
[→]
to select echo stretch feature desired:
1: Stretch echoes in bearing direction.
2: Stretch echoes in bearing and range directions.
4. Press the [MENU] key several times to close the menu. ES1 or ES2 appears at the right side
of the display when the echo stretch feature is active.
Note: ES2 is not available on the 0.125-0.5 nm ranges.
Range Direction
Echo stretch 1 OFF Echo stretch 2
Bearing Direction Bearing Direction