348
7 Maintenance
Note
• If you reboot CentreWare Internet Services, [Certificate Management] will appear for [Security] on the
[Properties] tab. [Certificate Management] can be used to view and select certificate data, and to export and
delete certificates.
Accessing CentreWare Internet Services when Data Encryption is Enabled
When HTTP communication is encrypted, enter “https” instead of “http” before the address when
accessing CentreWare Internet Services.
• Example of IP address: https://192.168.1.100/
(Replace the above “192.168.1.100” with IP address of your printer.)
• Example of Internet address: https://xxx.yyyy.zz.vvv/
Configuring Settings to Encrypt Communication Data for Printing with the
IPP Port
Encrypting HTTP communication makes it possible to encrypt communication data when
printing with the IPP port.
If the printer's IPP port is disabled (the default is [Disabled]), enable the report using the
procedure under "1.5 Enabling Ports" (P. 29).
Next, install a print driver on your computer and specify IPP as the output port.
The following describes how to install a print driver on your computer.
Note
• For information on how to install a print driver on your computer, refer to [Support Tools/Manuals] > [Media
Information] on the media (Software/Product Manual).
1.
On the [Start] menu, select [Devices and Printers].
2.
Right-click on the printer icon to display the printer properties.
3.
In the [Add Print Wizard] window, click [Next].
4.
Select [A network printer, or a printer attached to another computer], and then click [Next].
5.
Select [Connect to a printer on the Internet or on a home or office network], and then enter
the following URL into [URL]:
https://IP_Address/ipp/ (where IP_Address is the IP address of the printer).
Then click [Next].
6.
Click [Have Disk].
7.
In the dialog box that appears, enter (CD-ROM drive name): (folder where print driver is
stored), and then click [OK].
8.
Select the print driver, and then click [OK].
9.
Specify whether to use this printer as the default printer by selecting [Yes] or [No], and then
click [Next].
10. Click [Finish].
Configuring IPSec for Encryption
This section explains how to configure settings for encryption using IPSec.
