manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 300

300

7 Maintenance

5.

Close the finisher transport cover F, and then 
close the top transport door G of the finisher.

Note

• If the finisher transport cover F or top transport door G is 

not completely closed, a message will appear and the 
machine remain paused.

Disposal procedure (for Finisher-C1 with Booklet Maker)

1.

Make sure that the machine is not operating, 
and open the front door. 

2.

Pull out the hole punch waste container R4.

3.

Empty the container.

4.

Insert the emptied hole punch waste 
container into the finisher until it stops.

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands