manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 49

2.3 Circuit Breaker

49

2.3

Circuit Breaker

The printer is provided with a circuit breaker. In the event of a current leakage, the circuit breaker 
will automatically cut off the power circuit to prevent any leakage of fire from occurring. Check 
that the circuit breaker works properly at least once a month. Be sure to establish a ground for 
the machine. Without a proper ground, the circuit breaker may be disabled, causing a risk of 
electric shock.

If you have any problems with the circuit breaker, contact our Customer Support Center or your 
dealer.

The following describes how to check the circuit breaker.

1.

Press the <

> side of the printer’s power 

switch to turn off the power. 

Note

• Make sure that the display is blank and the <Energy 

Saver> button does not light up.

2.

Open the front cover.

3.

Press the < 

> side of the printer’s main 

power switch to turn off the main power.

Note

• The <Main Power> lamp goes out on the control panel.

4.

Press the <RESET> button. 

Note

• Confirm that the button will stay pressed even after the 

pushing force is released.

<RESET>
button

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands