manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 147

5.2 Common Menus Setting

147

[SOAP]

[ThinPrint]

Note

• This item appears only when HDD Extension Kit (optional) is installed.
• To  use  ThinPrint

®

 feature, contact our Customers Support Center or your dealer for details.

Network/Port
 SOAP

SOAP
 Port Status

SOAP
 Port Number

Setting

Description

Port Status

Sets whether to enable or disable the SOAP port at printer start-up.
• [Enabled]  (default)
• [Disabled]

Important

• If the printer runs out of memory when the port is enabled, the port is sometimes 

automatically disabled. If this happens, either disable unused ports, or change 
the memory allocation under [Allocate Memory].

Port Number

Sets the port number from 1 to 65535. (See *2 on P. 202.)
• [80] (default)

Note

• Set only unique port numbers. Note, however, that InternetServices/IPP/SOAP/

UPnP/WSD (See *6 on P. 202) ports and Internet services that use HTTP protocol 
can share the same port number.

Network/Port
 ThinPrint

ThinPrint
 Port Status

ThinPrint
 Port Number

ThinPrint

 

SSL/TLS

Setting

Description

Port Status

Sets whether to enable or disable the ThinPort port at printer start-up.
• [Enabled]
• [Disabled] (default)

Port Number

Sets the port number from 1 to 65535. (See *2 on P. 202.)
• [4000] (default)

Note

• Set only unique port numbers. 

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands