Fuji Xerox DocuPrint C5155d User Manual Download Page 202

Page: 202 / 433

202

5 Control Panel Settings

[Language]

When [Auto] is selected, data will be deleted if the language emulation automatically
selected is not present or is unavailable on the printer.

Holding down the <

> or <

> button cycles through the options. To display a setting's

default value, press <

> and <

> at the same time.

The following information is printed in each line during dump printing:

Count

Prints the total number of bytes counted from the beginning of the
job data.

Hexadecimal code

Prints print data delimited in 4 bytes in hexadecimal format.

ASCII code

Prints print data using JIS X0201 8-bit coded characters. Characters
that are not defined in JIS X0201 are printed as “UD”.

Character List

• When [Enabled] is set, and the print mode is set to [HexDump], PJL commands are also

output by [HexDump].

• When language emulation not installed on the printer is specified by a PJL command,

data is deleted.

WSD stands for Web Services on Devices.

Settings
Language

Setting

Description

Language

Sets the display language for the control panel.
• [English] (default)

The display language is English.

• [Trad. Chinese]

Displays screen messages in traditional Chinese.

• [Simp. Chinese]

Displays screen messages in simplified Chinese.

• [Korean]

Displays screen messages in Korean.

No.

Type

Characters

Blank

Space

Alphabet

ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnop
qrstuvwxyz

Numerals

0123456789

Symbols

!"#$%&'()*+,-./:;q=r?@m\n^_`

Summary of Contents for DocuPrint C5155d

















































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint C5155d

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint C5155d, User Manual

Search results

Summary of Contents for DocuPrint C5155d

Reviews:

Brands by name

Popular brands