Fuji Xerox DocuPrint C5155d User Manual Download Page 291

Page: 291 / 433

7.1 Replacing Consumables

291

Pull out the toner cartridge slowly while
holding its left side with one hand.

Prepare a new waste toner bottle out of a box.

10. While holding the left side of the waste toner

bottle, push the bottle in until it clicks.

11. Close the front cover.

Note

• If the front cover is not completely closed, a message will

appear and the machine remain paused.

12. Insert the used waste toner bottle into the

supplied plastic bag and then seal it firmly
with the zipper.

Waste Toner Bottle

Summary of Contents for DocuPrint C5155d

















































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint C5155d

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint C5155d, User Manual

Search results

Summary of Contents for DocuPrint C5155d

Reviews:

Brands by name

Popular brands