manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 173

5.2 Common Menus Setting

173

[Stored Jobs]

Note

• This item appears when the hard disk (optional) is installed, or when the Extension System Memory (optional) 

is installed and [RAM disk] is set to [Enabled].

System Settings
 Stored Jobs

Stored Jobs
 Job Expiry Date

Stored Jobs
 Keep for (Days)

Stored Jobs
 Delete at (Time)

Stored Jobs
 Keep for

Stored Jobs
 Upon Power Off

Setting

Description

Job Expiry Date

Sets the storage period for documents. Stored jobs are automatically deleted when 
the document expiry date is reached. 
• [Off] (default)

Documents are kept unconditionally.

• [No. of Days & Time]

Sets the storage period as a number of days and time. 

• [Duration]

Sets the number of hours until documents are deleted. 

Keep for (Days)

Sets the storage period within 1 to 14 days in 1-day increments. 
• [7  Days]  (default)

Delete at (Time)

Sets the time that documents are deleted. 
• [3:00AM] or [3:00] (default)

Note

• Set the time by the 12-hour clock or 24-hour clock by setting [System Settings] > 

[Machine Clock] > [Time Format].

Keep for

Sets the storage period between 0 hours and 15 minutes and 120 hours and 0 
minutes.
• [4 Hours and 0 Minutes] (default)

Upon Power Off

Sets whether or not to delete stored jobs regardless of the storage period when the 
printer is turned off or on.
• [Do not Delete Jobs] (default)

Deletes only stored jobs whose document expiry date is reached when the printer 
is turned off or on.
It does not delete stored jobs whose document expiry date is not reached.

• [Delete  Jobs]

Deletes all stored jobs when the printer is turned off or on.

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands