manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 310

310

7 Maintenance

Replacing the 200K Maintenance Kit

The following message appears on the printer’s control panel when the 200K Maintenance kit is 
near or reaches the end of its service life.

Important

• Do not touch the roller part of the 2nd BTR Unit.

Replacing the 2nd BTR Unit

1.

Switch off the power.

Important

• While the printer is in the Energy Saver mode, press the 

<Energy Saver> button to exit the mode, and then switch 
off the power.

Refer to

• For information on how to switch off the power and the 

main power, refer to "2.2 Switching On/Off the Power" 
(P. 46).

2.

Open Tray 5 (1), and then while lifting up the 
release lever (2) gently open the upper left 
cover A (3).

3.

Push the lever in the direction of an arrow.

4.

Take out the 2nd BTR Unit.

Message

Action

Ready  

Replace 

Trans. Roll

The 2nd BTR Unit and Paper Feed Rolls need to be 
replaced soon. Use the 200K Maintenance Kit to 
replace them.

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands