manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 287

7.1 Replacing Consumables

287

8.

Pull out the black paper while holding the 
protective cover with one hand. While doing 
so, keep the two points inserted in the holes.

9.

Grasp the tab on top of the cartridge and slide 
it toward the machine while holding the 
protective cover with one hand. 

10. Slide the tab until it stops. 

11. Carefully remove the protective cover.

12. Push the drum cartridge straight in the 

housing until it stops.

Note

• Put the protective cover into the drum cartridge box. 

13. Return the cover to the original position.

Note

• Push the cover until it clicks into place.

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands