manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 307

7.1 Replacing Consumables

307

2.

Take out the Odor Filter.

3.

Install a new Odor Filter.

Important

• Insert the Odor Filter as far as it will go.

4.

Attach the Cover R10.

Replacing the Suction Filter

1.

Switch off the power.

Important

• While the printer is in the Energy Saver mode, press the 

<Energy Saver> button to exit the mode, and then switch 
off the power.

Refer to

• For information on how to switch off the power and the 

main power, refer to "2.2 Switching On/Off the Power" 
(P. 46).

2.

Open Tray 5 (1), and then while lifting up the 
release lever (2) gently open the upper left 
cover A (3).

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands