374
7 Maintenance
7.16
Moving the Printer
Use the following procedure when moving the printer.
1.
Turn off the printer’s power switch and the main power switch.
2.
Unplug the power cord, interface cable, and all the other cables from the printer.
3.
Pull out the trays from the printer, and remove any paper in them. Re-wrap the paper and
store it away from dust and humidity.
4.
Push the trays all the way back into the printer.
5.
Install the handle cover to the Tray 1.
6.
Lift the printer and carefully move it. If moving over a long distance, pack the printer in a
box.
7.
Remove the handle cover from the tray.
Important
• This product weighs 81.2 Kg. When moving it, always carry it by a team of four persons.
• When moving or lifting the printer, always install the handle cover to the printer and move it carefully. After
the printer is located, remove the handle cover from the printer and keep it.
• In case of installing the optional 1 Tray Module, 3 Tray Module or Tandem Tray Module, be sure to install the
handle cover to lift the printer.
• If optional trays are installed, remove them before moving the printer. If trays are not installed securely, they
may fall and cause injuries. For information on how to remove the trays, refer to the installation guide provided
with the options.
Note
• It is not needed to remove the consumables such as toner cartridges when moving the printer.
handle cover
81.2 kg
