manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 299

7.1 Replacing Consumables

299

Emptying the Punch Waste Container 

When the finisher is installed and the hole punch waste container R4 becomes full, a message 
appears on the display. When the message appears, empty the hole punch waste container as 
instructed.

Important

• Empty the hole punch waste container when the machine is on. 
• Make sure to discard all paper chads when emptying the hole punch waste container. Not doing so will cause 

the container to fill up before the message telling you to empty the container appears again, and this can 
cause machine malfunction.

Disposal procedure (for Finisher-B1)

1.

Make sure that the machine is not operating, 
lift the finisher transport cover F, and then 
open the front transport door G of the 
finisher.

2.

Pull out the hole punch waste container.

3.

Empty the container.

4.

Insert the emptied hole punch waste 
container into the finisher until it stops.

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands