Fuji Xerox DocuPrint C5155d User Manual Download Page 322

Page: 322 / 433

322

7 Maintenance

Press the <

> button to display [IP Address].

10. Press the <

> or <OK> button to select.

The current IP address is displayed.

11. Enter the value in the first field using the <

or <

> button (Example: 192), and press the

> button.

Note

• If you do not need to change the setting, press the < >

button to advance to the next field.

• Pressing the < > or < > button longer increments the

value by 10.

• To return to the previous field, press the < > button.

12. Enter the rest of the fields in the same

manner. After entering the last (4th) field
(Example: 192.168.1.100), press the <OK>
button to confirm your entry.

13. If you want to change a subnet mask and

gateway address, press the <Back> button
and proceed to Step 14.
If you want to finish configuring the settings,
proceed to Step 21.



To change the Subnet Mask/Gateway Address

14. Press the <

> button until [Subnet Mask] is

displayed.

15. Press the <

> or <OK> button to select.

The current subnet mask is displayed.

16. Enter the subnet mask in the same way you

entered the IP address (Example:
255.255.255.000), and press the <OK> button
to confirm your entry.

17. Press the <Back> button to return to [Subnet

Mask].

18. Press the <

> button to display [Gateway

Address].

19. Press the <

> or <OK> button to select.

The current gateway address is displayed.

IPv4 Settings

IP Address

•

000.000.000.000

IP Address

192.000.000.000

IP Address

•

192.168.001.100

IPv4 Settings

Subnet Mask

•

000.000.000.000

Subnet Mask

•

255.255.255.000

IPv4 Settings

Subnet Mask

IPv4 Settings

Gateway Address

•

000.000.000.000

Summary of Contents for DocuPrint C5155d

















































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint C5155d

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint C5155d, User Manual

Search results

Summary of Contents for DocuPrint C5155d

Reviews:

Brands by name

Popular brands