manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 121

4.2 Loading Paper

121

10. Press the <OK> button to apply the setting.

11. To configure settings for other trays, press the 

<

> button or <Back> button until the screen 

in step 8 is displayed. Then repeat the steps 
that follow.
To exit the setting operation, press the 
<Settings> button to return to the [Ready to 
print] screen.

Configuring Image Quality Settings for Each Paper Type

The printer performs image quality processing in accordance with the current paper type setting. 
Use the following procedure to change the image quality process if problems with print and 
image quality often happen.

1.

On the control panel, press the <Settings> 
button to display the menu screen. 

2.

Press the <

> button until [Admin Menu] is 

displayed.

3.

Press the <

> or <OK> button to select.

[Network/Port] is displayed.

4.

Press the <

> button until [Printer Settings] is 

displayed.

5.

Press the <

> or <OK> button to select.

[Substitute Tray] is displayed.

6.

Press the <

> button until [Image Quality] is 

displayed.

7.

Press the <

> or <OK> button to select.

[Plain] is displayed. 

8.

Press the <

> button until the desired type of 

paper is displayed, and then press the <

> or 

<OK> button to display its current setting.
The current set value is displayed.

9.

Press the <

> button until the desired paper 

quality is displayed.
(Example: D)

Tray 1

•

Bond

Settings

 LanguageEmulation

Settings

 Admin Menu

Admin Menu

 Network/Port

Admin Menu

 Printer Settings

Printer Settings

 Substitute Tray

Printer Settings

 Image Quality

Image Quality

 Plain

Plain

•

B

Plain

 D

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands