manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 311

7.1 Replacing Consumables

311

5.

Install a new 2nd BTR Unit.

Important

• Never touch the roller part of the 2nd BTR Unit when 

installing it.

6.

Return the upper left cover A to the original 
position.

7.

Switch on the power.

Replacing the Paper Feed Rolls

1.

Switch off the power.

Important

• While the printer is in the Energy Saver mode, press the 

<Energy Saver> button to exit the mode, and then switch 
off the power.

Refer to

• For information on how to switch off the power and the 

main power, refer to "2.2 Switching On/Off the Power" 
(P. 46).

2.

Pulling out Tray 1 and remove the paper, take 
off Tray 1 from the machine.

3.

Slide the cover towards the front as shown in 
the right figure.

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands