manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 87

3.9 Charge Print

87

9.

Press the <

> or <OK> button to select. 

A screen appears that allows you to specify 
whether to delete or save the document after 
printing.

Note

• To delete the job without printing, press the < > button 

to display [Delete], press the < > button, and then press 
the <OK> button.

• If you want to save the document in the printer after 

printing, press the < > button, display [Print & Save], and 
proceed to Step 10.

10. Select with <

> or <OK> button.

A screen to enter the number of copies 
appears.

11. Enter the number of copies using the <

> 

button, and then press the <

> or <OK> 

button to print the document. A print start 
confirmation screen appears.

12. Press the <OK> button to print.

Printing starts.

13. Press the <Print Menu> button to return to the 

[Ready to print] screen.

1.Report

 Print & Delete

Quantity

 1 Set(s)

1.Report

 Use OK to print

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands