manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 46

46

2 Basic Operation

2.2

Switching On/Off the Power 

Switching the Main Power On

By switching the main power on, the controller and memory are also turned on while the <Main 
Power> lamp lights up on the control panel. Do not switch the main power off unless you need to 
open the inside of the printer to install optional products and move or clean the printer.

Important

• Do not switch off the main power immediately after switching on the main power. This may damage the hard 

disk and the memory or cause a machine malfunction.

1.

Open the front cover.

2.

Press the < | > side of the printer’s main power 
switch to turn on the main power. 

Note

• The <Main Power> lamp lights up on the control panel.

3.

Close the front cover. 

Switching the Power On

Confirm that the main power is switched on before pressing the power switch.

The printer takes approximately 28 seconds to warm up and to be ready to print after switching 
the power on. This may take more time depending on your machine configuration.

Switch the power off at the end of the day or when not using the printer for an extended period 
of time.

1.

Press the < | > side of the printer’s power 
switch to turn on the power. 

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands