manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 29

1.5 Enabling Ports

29

1.5

Enabling Ports

Set all ports you want to use to [Enabled] on the control panel.

When using the standard setup, this operation is unnecessary as the default port is set to 
[Enabled]. 

Use the following procedure to enable each port.

The following procedure uses IPP as an example.

1.

On the control panel, press the <Settings> 
button to display the menu screen. 

2.

Press the <

> button until [Admin Menu] is 

displayed.

3.

Press the <

> or <OK> button to select.

[Network/Port] is displayed.

4.

Press the <

> or <OK> button to select.

[LPD] is displayed.

5.

Press the <

> button until the desired 

protocol is displayed. (Example: IPP)

6.

Press the <

> or <OK> button to select.

[Port Status] is displayed.

7.

Press the <

> or <OK> button to select.

The current set value is displayed.

8.

Press the <

> button to display [Enabled].

9.

Press the <OK> button to confirm your 
selection. 

10. The setting is now complete.

Press the <Settings> button to close the menu 
screen. 
The printer automatically restarts. 

Settings

 LanguageEmulation

Settings

 Admin Menu

Admin Menu

 Network/Port

Network/Port

 LPD

Network/Port

 IPP

IPP

 Port Status

Port Status

•

Disabled

Port Status

 Enabled

Port Status

•

Enabled

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands