Section 5 — Effect Concepts
ASR-10 Musician’s Manual
8
Selecting Effects
Single Function Effect Mixer
Vol
Pan
L
R
L
R
Effect 1
BUS1
BUS2
BUS1
BUS2
Voice Output
Main
Outputs
AUX 1
L
R
Output Expander
BUS3
BUS3
Destination Bus
L
R
Output Expander
L
R
Output Expander
AUX 3
AUX 2
The above diagram shows the effects busses and the output mixing. Every voice is assigned to
one of the four stereo busses, which go around or through the effects processing. The heavy lines
are stereo paths. Some effects, such as HALL REVERB, also have a Dry/Wet mix of BUS3 into
Effect 1.
Dual Function Effect Mixer
AUX 1
L
R
Output Expander
L
R
Output Expander
L
R
Output Expander
AUX 3
AUX 2
Pan
L
R
L
R
Effect 2
BUS1
BUS2
BUS1
BUS2
Voice Output
Main
Outputs
Effect 1
Vol
BUS3
Destination Bus
BUS3 is
generally DRY
When the selected effect is a combined effect that has more than one signal processing function
(such as chorus and reverb), the BUS 1 bus feeds Effect 1 and Effect 2, and the BUS2 bus feeds
Effect 2 only. Within effects there may also be Dry/Wet mixes (such as the Chorus Mix within
the REVERB effect).
