Section 13 — Sequencer and Audio Track Parameters
ASR-10 Musician’s Manual
14
Audio Track Parameters
Edit/(audio) Track Page
These parameters affect the REC SRC Signal Monitor. The parameter values displayed apply to
the currently selected audio track (yellow LED solidly lit). To select a track for editing, press the
desired Audio Track button.
The following Edit/(audio) Track parameters are located at the same screen address as the
corresponding Edit/(seq) Track screen, and they show the same current parameter.
Pressing an Audio Track button when the display is showing an Edit/(seq) Track parameter
screen that is not applicable to audio tracks, will display the last selected Edit/(audio) Track
screen. When the display is showing an Edit/(seq) Track parameter screen that is applicable to
audio tracks, pressing an Audio Track button will display the selected audio track’s value(s) for
the current parameter. While an audio track is selected, only applicable Edit parameter screens
will be subsequently displayed.
• When the Sample•Source Select REC SRC parameter is set to INPUTDRY, the audio tracks
monitor the Audio Inputs. The left Audio Input is monitored on Audio Track A and the right
Audio Input on Audio Track B.
• When the Sample•Source Select REC SRC parameter is set to INPUT+FX, the ESP chip is
dedicated to processing the Audio Inputs, and the audio tracks monitor the direct output of
the ESP chip. The left effects channel is monitored on Audio Track A and the right channel on
Audio Track B. The Wet/Dry mix is set on the Edit/Effects page.
• When the Sample•Source Select REC SRC parameter is set to MAIN-OUT, no audio signals
are monitored through the Edit/(audio) Track settings. All other ASR-10 instruments retain
their Edit/(seq) Track settings.
• When the Sample•Source Select REC SRC parameter is set to DIGITAL, the audio tracks
monitor the Digital Input. The left channel is monitored on Audio Track A and the right
channel on Audio Track B.
• Edit/(audio) Track parameter settings are saved with the global parameters (using the
Command/System•MIDI SAVE GLOBAL PARAMETERS command).
EDIT
ATRK PLAYBACK STATUS
(Audio) TRACK
Press Edit /(audio) Track / 0
Double-clicking the Track button on the Edit/(audio) Track page will reveal the following ATRK
PLAYBK STATUS parameter:
EDIT
TRACK
STOP
Range: * (TRACK is empty), P (play — TRACK contains data, and is unmuted), M (mute —
TRACK contains data, and is muted)
• Press the Audio Track buttons to move the cursor. Audio Tracks that are muted before
entering record will not have their data cued up, and will not play if unmuted during play.
Note:
When recording Audio Tracks with Edit/Seq•Song, MUTE ATRKS IN REC=YES, Audio Track
playback on the track being recorded on is automatically muted while the ASR-10 is in Record,
and the ATRK PLAYBK STATUS is displayed as below, and cannot be edited.
