Section 11 — WaveSample and Layer Parameters
ASR-10 Musician’s Manual
14
Edit/Env 1, Env 2, Env 3 Parameters
EDIT
ATTACK TIME VEL AMT
ENV
Press Edit / Env1, Env2, or Env3 / 5
ATTACK TIME VELOCITY AMOUNT makes TIME-1 shorter with increasing velocity. If TIME-1
is set to zero this parameter will have no effect.
Range: 0 to 99
EDIT
KBD TIME SCALING
ENV
Press Edit / Env1, Env2, or Env3 / 6
KBD TIME SCALING changes the envelope times above and below the root key. Positive values
make the envelope shorter for keys above the root key, and longer for keys below the root key.
Negative values have the opposite effect. The root key is not affected by this parameter. 2ND
RELEASE time is also not affected by this parameter.
Range: -99 to +99
EDIT
SOFT VEL CURVE
ENV
Press Edit / Env1, Env2, or Env3 / 7
This parameter determines how incoming velocity will affect the envelope’s interpolation
between the SOFTVEL and HARDVEL level settings. There are four settings:
• OFF — The envelope uses only the HARDVEL levels, regardless of velocity.
• VEL, VEL1, or VEL2 — Incoming velocity will modulate the envelope levels between the
SOFTVEL and HARDVEL level settings, according to one of the following velocity curves:
VEL
(linear)
0
50
100
50
100
0
Keyboard
Velocity
VEL1
(convex)
0
50
0
50
100
100
Keyboard
Velocity
VEL2
(concave)
0
50
100
50
100
Keyboard
Velocity
Hard Vel
Level
Soft Vel
Level
