Section 6 — Effect Parameters
Edit/Effect Parameters
43
RELEASE TIME
Range:
1ms to 10.0s
This parameter determines how long it takes for the compression to be fully deactivated after the
input signal drops below the threshold level. This is generally chosen longer than the attack
time.
GATE OFF
Range:
-96 to +0 dB
This parameter sets the lower threshold level at which the noise gate shuts off the audio.
GATE ON
Range:
-96 to +0 dB
This parameter sets the upper threshold level at which the noise gate passes audio. This higher
second threshold prevents false “turn ons.”
HIGH PASS FC
Range:
4 to 8000 Hz
This parameter controls a hi pass filter frequency for the side chain EQ. This is useful for de-
essing.
BASS FC
Range:
0 to 1000 Hz
This parameter sets the cutoff frequency of the lower frequency band shelving filter.
GAIN
Range:
-48 to +24 dB
This parameter sets the amount of boost or cut applied to the low shelving filter.
MID1 FC
Range:
0 to 9999 Hz
This parameter sets the center of the mid-frequency parametric.
GAIN
Range:
-48 to +24 dB
This parameter sets the amount of boost or cut applied to this frequency parametric.
MID1 Q
Range:
1 to 18
This parameter is a bandwidth control that determines the width of the resonant peak at the
center of the frequency band. By raising the band you can produce a narrower bandwidth.
MID2 FC
GAIN
MID2 Q
These three parameters are identical to the previous three parameters, and can be used to control
different bandwidths within the mid range.
TREBLE FC
Range:
1KHz to 15KHz
This parameter sets the cutoff frequency of the upper frequency band high shelving filter.
GAIN
Range:
-48 to +24 dB
This parameter sets the amount of boost or cut applied to the high shelving filter.
EQ TRIM
Range:
-48 to +0 dB
This parameter adjusts the input level to the side chain EQ, which performs analysis on the input
signal to selectively compress it.
MOD SRC 1
MOD SRC 2
DST 1
DST 2
MIN 1
MIN 2
MAX 1
MAX 2
These parameters are explained in detail in Section 5 — Effect Concepts.
