Section 13 — Sequencer and Audio Track Parameters
Track Commands
25
• Press Enter•Yes. The display shows:
CMD
STOP
TRACK
• This command does not have any Audition.
• Pressing Enter•Yes will execute the Command. If a destination Track in a different Sequence
is selected as the target for the COPY, the PREPARING AUDIO TRACKS message will be
briefly displayed while the Audio Tracks are cued up for Playback.
CMD
ERASE AUDIO TRACK
(Audio) TRACK
Press Command /(audio) Track / scroll using the arrow buttons
This command will erase all Audio Trigger, Audio-Mix and Audio-Pan events from the currently
selected Audio Track.
• Pressing Enter•Yes will invoke the Command, revealing the following screens:
CMD
STOP
TRACK
Range: A or B (selected by pressing an Audio Track button)
A secondary parameter determines whether or not the command will erase all the RAM and
Disk AudioSamples that are triggered by the Audio Trigger events on the Audio Track being
erased, or if only the Audio Trigger, Audio-Mix and Audio-Pan events will be erased, leaving
the AudioSamples intact:
CMD
STOP
TRACK
Range: ASMPLS, ATRK EVENTS ONLY
• Pressing Enter•Yes will execute the Command. This command has no Audition.
CMD
SHIFT AUDIO TRACK
(Audio) TRACK
Press Command /(audio) Track / scroll using the arrow buttons
This command allows all Events on the currently selected Audio Track to be shifted by ±96
clocks.
• Pressing Enter•Yes will invoke the Command, revealing the following screens:
CMD
STOP
TRACK
