Section 13 — Sequencer and Audio Track Parameters
ASR-10 Musician’s Manual
24
Track Commands
Command/(audio) Track Page
These commands allow you to manipulate Audio Track data.
CMD
COPY AUDIO TRACK
(Audio) TRACK
Press Command /(audio) Track / scroll using the arrow buttons
This command allows the currently selected Audio Track to be copied from the current Sequence
or the Song, to any other Audio Track in any sequence, or to the Song, in memory. This will erase
all existing Audio Track Events on the DESTINATION Audio Track.
• Select the Audio Track that you want to copy by pressing its Audio Track button.
• Press Enter•Yes to invoke the Command. The display shows:
CMD
STOP
TRACK
• Press Enter•Yes. The display shows:
CMD
STOP
TRACK
• Use the Data Entry Controls to select the DESTINATION (where you want the copied Audio
Track to reside) Sequence or Song. This defaults to the currently selected sequence or song
name.
• Press Enter•Yes. The display shows:
CMD
STOP
TRACK
• Use the Audio Track buttons to select the destination Audio Track.
• Press Enter•Yes. The display shows:
CMD
STOP
TRACK
• Use the Data Entry Controls to select the BAR where you want to place the Audio Trigger
Event (that will play the AudioSample).
