EMC Connectrix ED-64M User Manual Download Page 470

Page: 470 / 476

i-2

Index

CLI

command parameters  E-11
command tree E-6
errors, handling  E-14
help, using E-14
navigation conventions  E-5
output  E-11
overview  E-3
scripts, commenting E-15

command line interface. See CLI
commands, SNMP A-4
config command (CLI) E-16
configuration

backing up and restoring  7-12
data, default values  7-19
report, exporting  5-53
resetting via CLI  E-64
resetting via Product Manager 7-18

configuration report, exporting 5-53
connectivity features 1-7
Connectrix Manager, logging in 3-6
Connectrix service processor 1-5
control processor. See CTP card
CTP card

described 1-12
pop-up menu 4-11

CTPs, swapping  4-12
customer support  G-3
Customer Support Center  G-7

data, Product Manager

backing up 7-12
restoring 7-15

date, configuring

via CLI E-51
via Product Manager 5-42

diagnostics, port  7-2
dialog boxes, using  3-5
director. See also ED-64M
director management 1-5
director properties  4-9
director speed, setting via Product Manager 5-9
domain ID, insistent. See insistent
domain ID, preferred. See preferred domain ID

domain RSCNs

described 5-8
enabling/disabling

via CLI E-43
via Product Manager 5-5

E_D_TOV

configuring

via CLI E-44
via Product Manager 5-5

described 5-11

ED-64M

components 1-11
overview 1-2
See also director

e-mail notification, enabling 7-10
Embedded Web Server

application, opening D-3
enabling via Product Manager  5-55
overview 1-16
passwords, configuring  D-5
using  D-2

Enterprise Fabric Mode, enabling

via CLI E-16, E-17
via Connectrix Manager.

See Connectrix Manager User Guide

error counters, port E-69
error light, clearing

via CLI E-63
via Product Manager 4-10

Ethernet connector on CTP card 2-8
Event Log 6-6
EWS. See Embedded Web Server
extended distance buffering

described 5-21
enabling/disabling

via CLI E-22
via Product Manager 5-19

Summary of Contents for Connectrix ED-64M





























































































































































































































































































































































































































































































Search results

Summary of Contents for Connectrix ED-64M

Reviews:

Brands by name

Popular brands

EMC Connectrix ED-64M, User Manual

Search results

Summary of Contents for Connectrix ED-64M

Reviews:

Brands by name

Popular brands