EMC Connectrix ED-64M, User Manual

Page: 422 / 476

E
E-88
Connectrix ED-64M User Guide
Command Line Interface
show.nameServerExt
Syntax
nameServerExt
Purpose This command displays information from the name server database
for devices attached to this director. It displays the exact same
information as shown in the show.nameServer command, but also
includes display of the Symbolic Nameserver information. Note that
it is possible to have more than one device per port for any public
loop devices attached to an FL_Port.
The symbolic nameserver information will force the CLI to wrap its display
several times per node. For this reason, this command is supported only in
comma-delimited mode. The user will receive an error message if this
command is issued in tabular mode.
Parameters This command has no parameters.
Command Example
Root> show nameServerExt
Output The device information data is displayed as a table that includes the
following properties.
◆
Type — N, NL, F/NL, F, FL, E, B.
◆
Port Id — The 24-bit Fibre Channel address.
◆
Port Name
— The Port World Wide Name of the attached device.
◆
Node Name — The Node World Wide Name of the attached
device.
◆
COS
— The class of service (for example, 1; 2; 3; 4; 5; 6; F; 1,2; 2,3).
◆
FC4 Types — The FC4 types registered for this device. The
numbers in this field correspond to the list at the bottom of the
table.
◆
SymNodeName — 255-character representation of the Symbolic
Node Name.
◆
SymPortName — 255-character representation of the Symbolic
Port Name.