EMC Connectrix ED-64M, User Manual

Page: 386 / 476

E
E-52
Connectrix ED-64M User Guide
Command Line Interface
config.system.location
Syntax
location “systemLocation”
Purpose This command sets the system location attribute.
Parameters This command has one parameter.
Command Example
Root> config system location “Everywhere”
config.system.name
Syntax
name “systemName”
Purpose This command sets the system name attribute.
Parameters This command has one required parameter.
Command Example
Root> config system name “Joe’s director”
config.system.show
Syntax
show
Purpose This command shows the system configuration.
Parameters This command has no parameters.
Command Example
Root> config system show
Output The system configuration is displayed as a table similar to that shown
under Output Examples.
systemLocation
Specifies the new system location for the
director. The location can contain up to 255
characters.
systemName
Specifies the new system name for the director.
The name can contain up to 24 characters.