EMC Connectrix ED-64M, User Manual

Page: 389 / 476

E
The config Branch
E-55
Command Line Interface
config.zoning.clearZoneSet
Syntax
clearZoneSet
Purpose This command clears the zone set contained in the work area,
removing all zones, and takes effect immediately.
Description This command does not change the zone set name.
Parameters
This command has no parameters.
Command Example
Root> config zoning clearZoneSet
config.zoning.addZone
Syntax
addZone “zoneName”
Purpose This command adds a new (empty) zone to the zone set in the work
area.
Description Changes are not activated on the director until the
config.zoning.activateZoneSet
command is issued. The CLI
supports the number of zones per zone set specified for a given
product.
Parameters This command has one parameter.
Command Example
Root> config zoning addZone TheUltimateZone
zoneName
Specifies the name of the new zone. The
zoneName
must contain 1 to 64 characters.
Valid characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcd
efghijklmnopqrstuvwxyz0123456789$-^_
Spaces are not permitted, and the first character
must be alphabetical.