EMC Connectrix ED-64M, User Manual

Page: 222 / 476

A
A-6
Connectrix ED-64M User Guide
Using SNMP to Manage the Switch
SNMP Framework MIB SNMP Framework MIB (snmp-framework.mib) is needed to
successfully compile and install the FibreAlliance MIB on the
Network Management Station.
No changes were made to this MIB with the 7.01 release.
Fibre Channel Fabric
Element MIB and
TCP/IP MIB-II
Fibre Channel Fabric Element MIB V1.10 April 24 2000 (fcfe.mib) and
standard TCP/IP MIB-II (rfc1213.mib) are implemented by the
SNMP agent that runs on the switch. Use the Configure option in the
corresponding Connectrix Product Manager to configure access to
these MIBs from authorized SNMP Network Management Stations.
Configuration must be done separately for each individual switch
requiring SNMP access.
No changes were made to this MIB with the 7.01 release.
ED-1032 Enterprise
MIB
ED-1032 Enterprise-specific MIB V1.7 (ed-1032.mib) is implemented
by the SNMP agent that runs on the ED-1032 Fibre Channel Director.
No changes were made to this MIB with the 7.01 release.
Connectrix Enterprise
MIB
Connectrix Enterprise-specific MIB V2.0 (fceos.mib) is implemented
by the SNMP agent that runs on Connectrix M-series Fibre Channel
switch products.
No changes were made to this MIB with the 7.01 release.