EMC Connectrix ED-64M, User Manual

Page: 437 / 476

E
show
E-103
Command Line Interface
• CRC Errors — (CTA) CRC Errors
• Discarded Frames — (CTA) Discarded Frames
• Frames Too Short — (CTA) Frames Too Short
• Delimiter Errors — (CTA) Delimiter Errors
• Address ID Errors — (CTA) Address ID Errors
• Cls2 BusiedFrms — (CTA) Class 2 Busied Frames
• Cls2 RejectedFrms — (CTA) Class 2 Rejected Frames
• Cls3 DiscardFrms — (CTA) Class 3 Discarded Frames
• Phys Lnk Err Set — (CTA) Physical Link Errors Summed Set
◆
Value — Increment or utilization value of the alert
◆
Interval — Time interval of the alert
Output Example The output from show.thresholdAlerts.log is similar to the
following:
Date/Time Name Port Type Value Int
---------------- ------------- ----- ----------------- ----- ---
05/26/02 10:58A CTA Alert #4 2 Cls3 DiscardFrms 250 10
05/24/02 12:01A CTA Alert #4 2 Cls3 DiscardFrms 250 10
05/22/02 10:58A My test CTA 43 CRC Errors 35 30
05/20/02 08:01P TTA Test #3 2 Tx Util 85 120
03/01/02 02:58A CTA Alert #1 130 CRC Errors 100 60
show.zoning
Syntax
zoning
Purpose This command shows the zoning configuration saved on the fabric.
Parameters This command has no parameters.
Command Example
Root> show zoning
Output The zoning configuration data is displayed as a table that includes
the enabled/disabled status, name, and member zones of the zone
set.