EMC Connectrix ED-64M, User Manual

Page: 73 / 476

3
Product Manager Menu Bar
3-13
Product Manager Overview
– Diagnostics
• Clear System Error Light — Turns off the amber system error
LED, located below the green power LED on the front of the
director.
• Enable Unit Beaconing — Causes a system error light on the
front of the director to blink, to help users locate the actual
unit in an equipment room. (You can enable unit beaconing
only if the system error light is off, signifying that there are no
outstanding errors.)
• Properties — Displays such information as the director name,
description, location, and contact person. Refer to Displaying
Director Properties on page 4-9.
• Close — Closes the Product Manager window.
◆
Configure :
• Identification — Allows you to specify information that will
appear in the identification table at the top of the Hardware
view and in the Connectrix Manager Products view (if the
Products view is configured to display names)
Refer to Configuring Director Identification on page 5-3 for more
information.
• Operating Parameters — Allows you to set the following
operating parameters (described in greater detail under
Configuring Operating Parameters on page 5-5):
Switch
Parameters Preferred Domain ID
Insistent
Rerouting Delay
Domain RSCNs
Suppress RSCNs on zone set activations
Director Speed (2 Gb/s or 1/Gb/s)