EMC Connectrix ED-64M, User Manual

Page: 283 / 476

A
Fibre Alliance MIB (fcmgmt.mib)
A-67
Using SNMP to Manage the Switch
FcConnUnitPortPhysicalNumber Unsigned32 Physical port number
from 0 to Maximum
port number – 1. R This is the internal port number this
port is known by. In many
implementations, this should be the
same as fcConnUnitPortIndex.
Some implementations may have
an internal port representation not
compatible with the rules for table
indexes. In that case, provide the
internal representation of this port
in this object. This value may also
be used in the
fcConnUnitLinkPortNumberX or
fcConnUnitLinkPortNumberY
objects of the fcConnUnitLinkTable.
FcConnUnitPortProtocolCap
(added from Mib3.0) OCTET STRING
(SIZE (2)) If the port is Not
installed:
fcConnUnitPortProtoco
lCap = 0
else it depends on the
configured Port Type:
Gx_Port 3 = Loop(1) +
Fabric(2)
G_Port 2 = Fabric(2)
Fx_Port 3 = Loop(1) +
Fabric(2)
F_Port 2 = Fabric(2)
E_Port 2 = Fabric(2) R Bit mask that specifies the driver
level protocol capability of this port.
If this is not applicable, return all
bits set to zero.
The bits have the following
definition: unknown – 0, Loop – 1,
Fabric – 2,
SCSI – 4, TCP/IP - 8, VI – 16,
FICON – 32.
FcConnUnitPortProtocolOp
(added from Mib3.0) OCTET STRING
(SIZE (2)) If the port is Not
installed:
fcConnUnitPortProtoco
lOp = 0
else if the Port State is
offline
fcConnUnitPortProtoco
lOp = 0
else it depends on the
operating Port Type:
F_Port 2 = Fabric(2)
FL_Port 1 = Loop(1)
E_Port 2 = Fabric(2)
H_Port 1 = Loop(1)
B_Port 2 = Fabric(2) R Bit mask that specifies the driver
level protocol(s) that are currently
operational. If this is not applicable,
return all bits set to zero. This
object has the same definition as
fcConnUnitPortProtocolCap.
Table A-33
Port Table (continued)
FA MIB Object Name Type Product Mapping Access Description