EMC Connectrix ED-64M, User Manual

Page: 189 / 476

6
Audit Log
6-5
Using Logs
◆
Action — User action that caused the configuration change, such
as off-line status, port name change, or change of address.
◆
Source — Identifies the user making the change through the
switch Product Manager and IP or DNS host name address of the
remote user’s workstation:
• Maintenance Port: Change was made by a user connected to
the maintenance port.
• Connectrix Manager: Change was made by an Product
Manager user.
• SNMP: Change was made by a remote SNMP management
station.
• Fabric: Change was initiated by another switch/director in the
fabric that is not managed by this Connectrix service
processor.
• Web Server: Change was made by a user through the
Embedded Web Server interface.
• Fibre Channel Host: Change was made inband by a Fibre
Channel host through the open systems management server.
• Telnet: Change was made through a Telnet connection.
◆
Identifier — Identifies the user making the change according to
the source:
• Maintenance Port: No entry appears.
• Connectrix Manager: Includes <user>@<address>, where
<user> is the Product Manager user name, and <address> is
the network address of the workstation (remote user
workstation or Connectrix service processor).
• SNMP: Contains the network address of the SNMP
management station.
• Fabric: No entry appears.
• Web Server: Includes <user>@<address>, where <user> is the
Web Server user name and <address> is the network address
of the Web user.
• Fibre Channel Host: No entry appears.
• Telnet: Change was made through a Telnet connection.