![EMC Connectrix ED-64M User Manual Download Page 343](http://html1.mh-extra.com/html/emc/connectrix-ed-64m/connectrix-ed-64m_user-manual_2399809343.webp)
E
CLI Overview
E-9
Command Line Interface
Navigating the CLI Command Tree
Once the administrator or operator logs in and sees the
Root>
prompt, the CLI commands are accessed by navigating up and down
the CLI command tree. To move from the root through the any of the
four extended branches, enter the name of the next branch as shown
in Table E-2.
For example, to use the config.port.name command to configure the
name for port 4 on the director, you would enter a series of
commands similar to the following:
thresholdAlerts -------- setState
deleteAlert
counter ------------------ addAlert
addPort
removePort
setCounter
setParams
show
show --------------------- eventLog
features
frus
ip -------------------------- ethernet
loginServer
nameServer
nameServerExt
port ----------------------- config
info
status
technology
security ----------------- fabricBinding
portBinding
switchBinding
switch
system
zoning
Table E-2
CLI Command Tree (continued)
Summary of Contents for Connectrix ED-64M
