EMC Connectrix ED-64M, User Manual

Page: 151 / 476

5
Configuring Ports
5-23
Configuring the Director
Binding to the Attached Device
To bind a port to the device that is logged in to the port, right-click the
port’s Port Binding column; then click Bind Port to Attached WWN
on the pop-up menu. The Bound WWN column will display that
device’s WWN.
Setting All Ports
To set binding configuration for all ports in the director at the same
time, right-click anywhere in the Port Binding column; then click the
desired option:
◆
Bind All WWNs — Enables Port Binding for all ports. Each port
will be bound to the device with the WWN/Nickname entered in
the Bound WWN column for that port.
◆
Unbind All WWNs — Disables Port Binding for all ports,
allowing any device in the fabric to attach to any port in the
director.
◆
Bind All Ports to Attached WWN — Binds each port to the
device currently logged in to to that port. The Bound WWN
column will display that device’s WWN/Nickname.
◆
Bind Port To Attached WWN — Binds the port to the device
currently logged in to that port. The Bound WWN column will
display that device’s WWN/nickname.
◆
Clear All Bound WWNs — Deletes all WWNs/Nicknames from
the Bound WWN column.
Speed This sets the data rate for the port. Click this column on a port’s row
to display a drop-down list; then click the desired type:
◆
2 Gb/sec
◆
1 Gb/sec
◆
Negotiate — Allows the port to negotiate the data speed with an
attached device.
Your director model and firmware may not allow 2 Gb/s data speeds.
To set all ports to the same setting, right-click the Speed column in
any row, and select a setting from the drop-down list:
◆
Set All To 1 Gb/sec
◆
Set All To 2 Gb/sec
◆
Set All To Negotiate