EMC Connectrix ED-64M, User Manual

Page: 361 / 476

E
The config Branch
E-27
Command Line Interface
config.security.fabricBinding.addMember
Syntax
addMember wwn domainId
Purpose This command adds a new member to the Fabric Member List in the
pending fabric binding work area. The number of entries is limited to
the maximum available domain IDs for the fabric (31).
Changes from this command are not activated to the fabric until the
activatePending
command is issued.
Parameters This command has two parameters:
Root> config security fabricBinding addMember
AA:99:23:23:08:14:88:C1 2
config.security.fabricBinding.clearMemList
Syntax
clearMemList
Purpose This command clears the Fabric Membership List for the pending
fabric binding working area.
This information is not saved to the fabric until the activatePending
command is issued. When the list is cleared, the CLI automatically adds the
managed switch to the fabric membership list.
Parameters This command has no parameters.
wwn
Specifies the world wide name (WWN) of the
member to be added to the fabric membership
list. The value of the WWN must be in
colon-delimited hexadecimal notation (for
example, AA:00:AA:00:AA:00:AA:00).
domainId
The domain ID of the member to be added to
the fabric membership list. Valid domain IDs
range from 1 to 31.