EMC Connectrix ED-64M, User Manual

Page: 276 / 476

A
A-60
Connectrix ED-64M User Guide
Using SNMP to Manage the Switch
The Port Table Generic information on ports for a specific fcConnUnit.
Table A-33 Port Table
FA MIB Object Name Type Product Mapping Access Description
fcConnUnitPortIndex Unsigned32 The port index. R A unique value among all
fcConnUnitPortEntrys on this
connectivity unit, between 1 and
fcConnUnitNumPorts.
FcConnUnitPortType INTEGER If the port is Not
installed
notPresent(3)
else if the Port State is
online use the
operating Port Type:
F_Port = fPort(8)
FL_Port = flPort(7)
E_Port = ePort(9)
H_Port = hubPort(4)
B_Port = ePort(9)
else use the configured
Port Type:
Gx_Port = gPort(10)
G_Port = gPort(10)
Fx_Port = flPort(7)
F_Port = fPort(8)
E_Port = ePort(9) R The port type refers to the protocol
active on the port and can take one
of the following values: unknown
(1) – cannot be determined, other
(2) – none of the following,
notPresent (3) – no port, hubPort
(4) – hub port, nPort (5) – end port
for fabric, lPort (6) – end port for
loop, flPort (7) – public loop, fPort
(8) – fabric port, ePort (9) -- fabric
expansion port, gPort (10) --
generic fabric port,
domainController (1) – domain
controller, hubController (12) – hub
controller, scsi (13) – parallel SCSI
port, escon (14) – escon port, lan
(15) – LAN port, wan (16) – WAN
port.