EMC Connectrix ED-64M, User Manual

Page: 232 / 476

A
A-16
Connectrix ED-64M User Guide
Using SNMP to Manage the Switch
The IP Address Table The IP address table contains this entity's IP addressing information.
The IP Routing Table The IP routing table contains an entry for each route presently known
to this entity.
Table A-6
IP Address Table
MIB-2 Object Name Type Access Description
ipAdEntAddr IpAddress R The IP address to which this entry's addressing information pertains.
ipAdEntIfIndex INTEGER R The index value which uniquely identifies the interface to which this entry is
applicable. The interface identified by a particular value of this index is the
same interface as identified by the same value of ifIndex
ipAdEntNetMask IpAddress R The subnet mask associated with the IP address of this entry. The value of the
mask is an IP address with all the network bits set to 1 and all the hosts bits
set to 0.
ipAdEntBcastAddr INTEGER R The value of the least-significant bit in the IP broadcast address used for
sending datagrams on the (logical) interface associated with the IP address of
this entry. For example, when the Internet standard all-ones broadcast
address is used, the value will be 1. This value applies to both the subnet and
network broadcasts addresses used by the entity on this (logical) interface
ipAdEntReasmMaxSize INTEGER
(0..65535) R The size of the largest IP datagram which this entity can re-assemble from
incoming IP fragmented datagrams received on this interface.
Table A-7 IP Routing Table
MIB-2 Object
Name
Type Access Description
ipRouteDest IpAddress R/W The destination IP address of this route. An entry with a value of 0.0.0.0 is
considered a default route. Multiple routes to a single destination can appear in the
table, but access to such multiple entries is dependent on the table- access
mechanisms defined by the network management protocol in use.
ipRouteIfIndex INTEGER R/W The index value which uniquely identifies the local interface through which the next
hop of this route should be reached. The interface identified by a particular value of
this index is the same interface as identified by the same value of ifIndex.
ipRouteMetric1 INTEGER R/W The primary routing metric for this route. The semantics of this metric are
determined by the routing-protocol specified in the route's ipRouteProto value. If this
metric is not used, its value should be set to -1.
ipRouteMetric2 INTEGER R/W An alternate routing metric for this route. The semantics of this metric are
determined by the routing-protocol specified in the route's ipRouteProto value. If this
metric is not used, its value should be set to -1.