EMC Connectrix ED-64M User Manual Download Page 420

Page: 420 / 476

E-86

Connectrix ED-64M User Guide

Command Line Interface

show.nameServer

Syntax

nameServer

Purpose

This command displays information from the name server database
for devices attached to this director.

Parameters

This command has no parameters.

Command Example

Root> show nameServer

Output

The device information data is displayed as a table that includes the
following properties:

◆

Type

— N, NL, F/NL, F, FL, E, B.

◆

Port Id

— The 24-bit Fibre Channel address.

◆

Port Name

— The Port World Wide Name of the attached device.

◆

Node Name

— The Node World Wide Name of the attached

device.

◆

COS

— The class of service (for example, 1; 2; 3; 4; 5; 6; F; 1,2; 2,3).

◆

FC4 Types

— The FC4 types registered for this device. The

numbers in this field correspond to the list at the bottom of the
table.

Summary of Contents for Connectrix ED-64M





























































































































































































































































































































































































































































































Search results

Summary of Contents for Connectrix ED-64M

Reviews:

Brands by name

Popular brands

EMC Connectrix ED-64M, User Manual

Search results

Summary of Contents for Connectrix ED-64M

Reviews:

Brands by name

Popular brands