EMC Connectrix ED-64M, User Manual

Page: 296 / 476

A
A-80
Connectrix ED-64M User Guide
Using SNMP to Manage the Switch
FcConnUnitPortStatCountInvalidOrderedSets Counter64 R
Not supported. Count of invalid ordered sets received at port. This count is part of the Link
Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only
stat.
FcConnUnitPortStatCountFramesTooLong Counter64 R
Not supported. Count of frames received at this port where the frame length was greater
than what was agreed to in FLOGI/PLOGI. This could be caused by losing
the end of frame delimiter. Note, this is a Fibre Channel only stat.
FcConnUnitPortStatCountFramesTruncated Counter64 R
stFramesTooShort (Supports only low 32
bits of counter; high 32 bits are set to zero). Count of frames received at this port where the frame length was less than
the minimum indicated by the frame header – normally 24 bytes, but it could
be more if the DFCTL field indicates an optional header should have been
present. Note, this is a Fibre Channel only stat.
fcConnUnitPortStatCountAddressErrors Counter64 R
stAddrIDErrors (Supports only low 32 bits of
counter; high 32 bits are set to zero). Count of frames received with unknown addressing; for example, unknown
SID or DID. The SID or DID is not known to the routing algorithm. Note. This
is a Fibre Channel only stat.
FcConnUnitPortStatCountDelimiterErrors Counter64 R
stDelimiterErrors (Supports only low 32 bits
of counter; high 32 bits are set to zero). Count of invalid frame delimiters received at this port. An example is a frame
with a class 2 start and a class 3 at the end. Note, this is a Fibre Channel
only stat.
FcConnUnitPortStatCountEncodingDisparityErrors Counter64 R
Not supported. Count of disparity errors received at this port. Note, this is a Fibre Channel
only stat.
Table A-36
Port Statistics Table (continued)
FA MIB Object Name Type Access
Product Mapping Description