EMC Connectrix ED-64M, User Manual

Page: 63 / 476

3
Product Manager Overview
3-3
Product Manager Overview
◆
Configure the management style between Open Systems and
FICON.
◆
Configure the interoperability mode for multiswitch fabrics.
◆
Configure the director name, location, description, and contact
person.
◆
Configure the data speed for the director and individual ports.
◆
Configure threshold alerts for ports.
◆
Enable LIN alerts on ports.
◆
Control individual Fibre Channel ports by blocking/unblocking
operation.
◆
Display FRU properties such as the FRU name, physical position
in the director (chassis slot number), active failed state, part
number, and serial number.
◆
Display information for individual Fibre Channel ports, such as
the port name, port number, Fibre Channel address, operational
state, type of port, and login data.
◆
Display information on nodes attached to ports.
◆
Display port performance and statistics.
◆
Display vital product data for the director, such as the system
name, description, contact person, location, status, model
number, firmware and Engineering Change (EC) level, and
manufacturer.
◆
Enable beaconing for ports and the director.
◆
Enable channel wrap mode (FICON mode only).
◆
Maintain a port address library (FICON mode only).
◆
Monitor the operational status of the director and each of its
hardware field-replaceable units.
◆
Perform an Initial Program Load (IPL).
◆
Perform maintenance tasks for the director including maintaining
firmware levels, administering the call-home feature, accessing
the director logs, and collecting data to support failure analysis.
◆
Reset port operation.
◆
Run port diagnostics.
◆
Set the date and time on the director.
◆
Swap addresses between ports (FICON mode only).