EMC Connectrix ED-64M, User Manual

Page: 271 / 476

A
Fibre Alliance MIB (fcmgmt.mib)
A-55
Using SNMP to Manage the Switch
FcConnUnitControl INTEGER Always return unknown (1)
on read operation.
ResetConnUnitWarmStart
(4), offlineConnUnit (5),
and onlineConnUnit (6) will
be supported by PCP.
ResetConnUnitWarmStart
(4) indicates IPL on the
switch is performed.
ResetConnUnitColdStart
(3) is not supported. R/W This object is used to control the
addressed connectivity unit.
NOTE: ‘ColdStart’ and ‘WarmStart’ are
as defined in mib-2 and are not meant
to be a factory reset.
ResetConnUnitColdStart: the
addressed unit performs a ‘ColdStart’
reset.
ResetConnUnitWarmStart: the
addressed unit performs a ‘WarmStart’
reset.
OfflineConnUnit: the addressed unit
puts itself into an implementation
dependant ‘offline’ state. In general, if a
unit is in an offline state, it cannot be
used to perform meaningful Fibre
Channel work.
OnlineConnUnit: the addressed unit
puts itself into an implementation
dependant ‘online’ state. In general, if a
unit is in an online state, it is capable of
performing meaningful Fibre Channel
work.
NOTE: Each implementation may
chose not to support SNMP Set
operations for any or all of these
values. For Sets specifying varbinds for
instances of this object and values not
supported by a given implementation,
the agent will return the SNMP
WrongValue PDU error code.
The values are defined as follow:
unknown (1), invalid (2),
resetConnUnitColdStart (3),
resetConnUnitWarmStart (4),
offlineConnUnit (5), onlineConnUnit (6).
Table A-30
fcConnUnitTable (continued)
FA MIB Object Name Type Product Mapping Access Description