EMC Connectrix ED-64M, User Manual

Page: 338 / 476

E
E-4
Connectrix ED-64M User Guide
Command Line Interface
CAUTION
!
If you choose to configure the director’s network IP address to be
on a public network, this could allow someone to attempt to
manage the director via the CLI. Therefore, if you configure the
director with a public IP address, EMC recommends that the CLI be
disabled, using Connectrix Manager. If you intend to use the CLI
(even though EMC does recommend and/or support its use), verify
that it is enabled in Connectrix Manager; however, be sure to
change the default passwords of the CLI. (Refer to login on
page E-11.)
This same caution applies to the Embedded Web Server interface.
(Refer to Appendix D.)
Entering CLI
Commands CLI commands can be entered directly at the command line of a
terminal or coded in a script.
CLI commands are not case sensitive.
Document
Conventions
Throughout this appendix, periods are used to separate the
components of a command name. However, the periods cannot be
included when the command is actually entered at the terminal or
coded in a script. (How to enter the commands is explained in
Navigating the CLI Command Tree on page E-9.)
Even though the commands cannot be entered with the periods, the
command line prompts do include the periods; for example:
Config.Port>