EMC Connectrix ED-64M, User Manual

Page: 118 / 476

4
4-32
Connectrix ED-64M User Guide
Monitoring and Managing the Director
As shown in Figure 4-10, the default view displays only the first 16
ports. You can display more ports in any of these ways:
◆
Drag the scroll bar at the upper right to display subsequent rows
one at a time.
◆
Click the Down arrow at the left side of the window (shown
below) to expand the port display to show all ports. (This hides
the Statistics Values table.)
◆
Move the cursor over the double lines to the right of the arrows
(shown in the previous item). When the cursor changes to an
Up/Down arrow, hold down the mouse button and drag the
Statistics values portion of the screen down.
Bar Graph Display
The Performance view provides a graphical display of performance
for all ports. Each bar graph in the upper portion of the main panel
displays the percentage of link utilization for a port. (This
information is updated every five seconds.) Each bar graph shows
the percentage of link utilization for the port; a red arrow marks the
highest utilization since the opening of the Performance view. (If the
system detects activity on a port, it displays one bar to represent
minimal activity.)
When a port is logged in, moving the cursor over its bar graph
displays a pop-up message:
◆
If the port is not logged in, the message displays the port’s current
operational state. (Refer to Table 4-3 on page 4-15.)
◆
If the port is an F_Port and is logged in, the message displays the
attached port’s WWN or nickname.
◆
If the port is an E_Port and is logged in, the message says
E_Port
.
Click here
to expand
or collapse
port display
<Switch Model: Switch Name>