EMC Connectrix ED-64M, User Manual

Page: 110 / 476

4
4-24
Connectrix ED-64M User Guide
Monitoring and Managing the Director
◆
Block Config — Blocked/unblocked configuration of the port as
set through one of these:
• The Configure Ports dialog box.
• The Block Port option available through:
– Port right-click menus in the port card view
– Block All Ports option on the port card’s right-click menus
in the port card view and Hardware view
– Port row right-click menus in the Port List view
– Port bar graph right-click menus in the Performance view
– Product menu on the port card view
Possible states are:
• Blocked — Devices communicating with the port are
prevented from logging into the director or communicating
with other devices attached to director ports. A blocked port
continuously transmits OLS.
• Unblocked — Devices communicating with the port can log
into the director and communicate with devices attached to
any other unblocked port in the same zone.
◆
State — Can be any of these:
• No Light
• Online
• Offline
• Beaconing
• Link Reset
• Not Operational
• Not Installed
• Invalid Attachment
• Port Failure
• Segmented E_Port
• Link Incident
• Testing
• Inactive
For more information on these states and corresponding status
symbol and LED indicator operations in the Hardware view, refer
to Table 4-3 on page 4-15.
◆
Type :
• F_Port if an N_Port is attached
• E_Port if another E_Port is attached