EMC Connectrix ED-64M, User Manual

Page: 179 / 476

5
Configuring Threshold Alerts
5-51
Configuring the Director
6. Select Next when you are done. A Modify Threshold window
appears, where you can change the % utilization, cumulative
minutes for the threshold to occur before notification, and the
time interval for measuring throughput and for alert notification.
7. Make appropriate changes, then continue through the Modify
Threshold windows, making changes as necessary, until the
summary screen appears displaying the alert configuration.
8. Perform either of the following steps:
• If you need to change any parameters, select Previous/Next
to display the desired Modify Threshold window.
• Select Finish when you are done.
Activating or
Deactivating Alerts Use the following steps to activate or deactivate existing threshold
alerts. In the active state, notifications are generated for the alert. In
the inactive state, notifications do not occur.
1. Click Configure on the Product Manager menu bar and select
Threshold Alerts on the drop-down menu.
This displays the Configure Threshold Alerts window (Figure
5-22 on page 5-45). The port’s current state, deactive or active, is
listed under the State column.
2. To change the state, select the alert by the alert information in the
table.
3. If the alert is active, select Deactivate to change to the deactive
state. If the alert is deactive, select Activate to change to the active
state.